

Material Introduction
Saferlon® PVDFSaferlon® PVDF Standard Sizes, Colors, Grades, Brands, Types
Material Introduction
Saferlon® PVDF sheet is manufactured by extruding with PVDF resin under high temperature. It’s a relative pure polymer without additives such as UV stabilizer, heat stabilizer, softener, lubricant, and fire retardant etc..PVDF owns excellent chemical resistance, aging resistance, processing performance, dimensional stability, fatigue resistance and creep resistance. Compared with PTFE, PVDF shows a higher rigidity and pressure resistance when compared with PTFE, and high toughness at low temperature, but the smoothness and electrical insulation properties is lower. PVDF continuous using temperature range -60-150 °C.
Saferlon® PVDF Standard Sizes, Colors, Grades, Brands, Types
Saferlon® PVDF Sheet | ||
Thickness(mm) | Tolerance | Width(mm) × Length(mm) |
T1 - T12 | ±0.30 - ±0.50 | 1000 x 2000 |
T8 - T50 | ±0.30 - ±0.50 | 1020 x 2040 |
Saferlon® PVDF Rod | ||
Diameter (mm) | Length (mm) | Mark |
20mm - 90mm | 1000/2000mm | Thickness progressively increases with 5mm based on 20mm, Length can be customized |
100mm | 1000mm | Length can be customized |
120mm - 180mm | 1000mm | Thickness progressively increases with 30mm based on 120mm, Length can be customized |
200mm | 1000mm | Length can be customized |
Colors include: Natural whte(subtranslucent)
Types: Rods, sheets, tubes, profiles
Note.Remarks
1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.
More products professional introduction Please browse the project website:
http://www.saferlon.com
-
Advantages:
♦ High rigidity and high strength
♦ Toughness, wear resistance, excellent creep resistance
♦ Excellent chemical stability, good corrosion resistance
♦ Anti-aging properties, anti-ultraviolet
♦ Good mechanical performance, easy welding, thermoforming and other machining
♦ Insulation resistance, high dielectric strength, low flammability
♦ Be stable for Oxide, Bromide and energy rays such as β and γ.
♦ Good welding, thermal forming and machining